top of page



February 2024

World Journal for Pediatric and Congenital Heart Surgery

Longitudinal Evaluation of CongenitalCardiovascular Surgical Performance andSkills Retention Using Silicone-MoldedHeart Models

Ponzoni M, Alamri R, Peel B, Haller C, Coles J, Vanderlaan RD, Honjo O, Barron DJ, Yoo SJ


January 2022

JTCVS Techniques

State-of-the-art silicone molded models for simulation of arterial switch operation: Innovation with parting-and-assembly strategy

Peel B, W Lee, Hussein N, Yoo SJ.


February 2021

Frontiers in Pediatrics

3D Modeling and Printing in Congenital Heart Surgery: Entering the Stage of Maturation

Yoo SJ, Hussein N, Peel B, Coles J, Van Arsdell GS, Honjo O, Haller C, Lam CZ, Seed M, Barron D

for website1.jpg

November 2020

European Journal of Cardio-Thoracic Surgery (EJCTS)

Assessment tool validation and technical skill improvement in the simulation of the Norwood operation using three-dimensional-printed heart models

Hussein N, Honjo O, Barron DJ, Haller C, Coles JG, Van Arsdell GS, Lim A and Yoo SJ 


May 2020

J Thorac Cardiovasc Surg.

Three-dimensional printing in congenital cardiac surgery-Now and the future

Van Arsdell GS, Hussein N, Yoo SJ. 

Central Picture.tif

December 2019

The Journal of Thoracic and Cardiovascular Surgery (JTCVS)

Development and validation of a procedure-specific assessment tool for hands-on surgical training in congenital heart surgery.

Hussein N, Lim A, Honjo O, Haller C, Coles JG, van Arsdell GS, Yoo SJ.

Screen Shot 2019-12-03 at 9.12.22 PM.png

March 2018

Circulation: Cardiovascular Imaging

Essential Modifiers of Double Outlet Right Ventricle: Revisit With Endocardial Surface Images and 3-Dimensional Print Models

Yim D, Dragulescu A, Ide H, Seed M, Grosse-Wortmann L, van Arsdell G, Yoo SJ.

3D printing in medicine.JPG

September 2016

3D Printing in Medicine

3D printing in medicine of congenital heart diseases

Yoo SJ, Thabit O, Kim EK, Ide H, Yim D, Dragulescu A, Seed M, Grosse-Wortmann L, van Arsdell G.

Capture for JKMS.JPG

September 2022


Congenital Heart Surgery Skill Training Using Simulation Models: Not an Option but a Necessity

Yoo SJ, Hussein N, Barron DJ


October 2021

Congenital Heart Disease

New Insights into Sinus Venosus Defects from Cross-Sectional Imaging

Yoo SJ, Lee S, de la Mora R, Saprungruang A, Haller C, Benson LN, Vida V, Guariento A, Lam CZ.


December 2020

Annals of Thoracic Surgery

Incorporation of hands-on surgical training in a congenital heart surgery training curriculum and assessment of its performance.

Hussein N, Honjo O, Barron DJ, Haller C, Coles JG, Yoo SJ.

Screen Shot 2020-07-09 at 1.46.24 PM.png

July 2020

Journal of Surgical Education

Evaluating the Impact of Medical Student Inclusion Into Hands-On Surgical Simulation in Congenital Heart Surgery

Hon NWL, Hussein N, Honjo O, Yoo SJ

Screen Shot 2020-04-08 at 11.55.17

March 2020

The Journal of Thoracic and Cardiovascular Surgery (JTCVS)

Use of 3-dimensionally printed heart models in the planning and simulation of surgery in patients with Raghib syndrome (coronary sinus defect with left superior vena cava)

Hussein N, Kasdi R, Coles JG, Yoo SJ

Figure 1 - Video clip (Arterial switch).

December 2019

The Journal of Thoracic and Cardiovascular Surgery (JTCVS)

Quantitative assessment of technical performance during hands-on surgical training of the arterial switch operation using 3-dimensional printed heart models.

Hussein N, Honjo O, Haller C, Coles JG, Hua Z, van Arsdell GS, Yoo SJ.

3d printing in surgical management of DO

January 2018

Frontiers in Pediactrics

3D Printing in Surgical Management of Double Outlet Right Ventricle

Yoo SJ, van Arsdell GS.

Capture for CHD.JPG

September 2022

Congenital Heart Disease

Disharmonious Ventricular Relationship and Topology for the Given Atrioventricular Connections. Contemporary Diagnostic Approach Using 3D Modeling and Printing

Yoo SJ, Saprungruang A, Lam CZ, Anderson RH


August 2021

Interactive CardioVascular and Thoracic Journal

Supravalvular aortic stenosis repair: Surgical training of two repair techniques using 3D-printed models.

Hussein N, Honjo O, Barron DJ, Yoo SJ.


November 2020

Journal of the American Heart Association (JAHA)

Systematic Approach to Malalignment Type Ventricular Septal Defects

Yoo SJ, Saito M, Hussein N, Golding F, Goo HW, Lee W, Lam CZ, Seed M, Dragulescu A


June 2020

3D Printing in Medicine

Development of a Dynamic Chest Wall and Operating Table Simulator to Enhance Congenital Heart Surgery Simulation

Peel B, Voyer-Nguyen P, Honjo O, Yoo SJ, Hussein N.

Screen Shot 2020-02-08 at 12.10.50

February 2020

3D Printing in Medicine

Simulation of semilunar valve function: computer-aided design, 3D printing and flow assessment with MR

Hussein N, Voyer-Nguyen P, Portnoy S, Peel B, Schrauben E, Macgowan C, Yoo SJ.


June 2019

Seminars in Thoracic and Cardiovascular Surgery

Hands-On Surgical Simulation in Congenital Heart Surgery: Literature Review and Future Perspective

Hussein N, Honjo O, Haller C, Hickey E, Coles JG, Williams WG, Yoo SJ.


June 2017

The Journal of Thoracic and Cardiovascular Surgery

Hands-on surgical training of congenital heart surgery using 3-dimensional print models

Yoo SJ, Spray T, Austin EH 3rd, Yun TJ, van Arsdell GS.

bottom of page